The Southbend HDG-72-M griddle uses natural gas and electronic spark ignition to cook food. If the pilot will not ignite, this unit has a flame safety device that prevents it from turning on. Because it produces grease-laden vapors, this griddle must be used under a grease hood and away from combustible surfaces—12 inches on the sides and 8 inches at the rear. To reduce the risk of overheating, the unit is lifted off the countertop with 4-inch-tall, adjustable legs.
- Durable aluminized steel rear and bottom panels
- Reinforced, double-insulated sides retain heat and keep their shape
- Burners are spaced every 12 in.
- Bending and warping are prevented because the griddle plate is 1-in. thick
- Manual controls use low to high heat settings
- Embedded, load-sensing thermostat
- Runner tube for each burner
- 5-in.-tall rear and 4-in.-tall side splashes keep messes on the cooktop
- Grease drawer holds liquid and debris left over from cooking and simplifies cleaning
- 4-in. legs can be adjusted to stand the unit upright
- Electronic spark ignition
- 3⁄4-in. rear gas connection and pressure regulator
- Damage-resistant flue opening
- Protected exhaust vent
- Flame failure safety device
- Requires 12-in. clearance on sides and 8-in. clearance on rear
- Must be installed under a vent hood
- 120,000 BTU
- cCSAus and CSA Gas-fired listed; NSF certified
Click here to view the spec sheet
For CA Residents: Click here for Prop 65 Warning