The Southbend HDG-24-M griddle requires 12-inch clearances on the sides and an 8-inch clearance on the rear from combustible surfaces. To keep other surfaces clean, grease and food debris are contained to the griddle plate by the side and rear splashes, while a removable grease drawer collects liquids and debris. Constructed of aluminized and stainless steel, the unit is durable and corrosion resistant.
- Heat is kept on the plate because the reinforced sides are double insulated
- 1-in.-thick griddle plate is durable
- 12-in. spacing between burners
- Even heat distribution on the griddle plate
- Manual controls range from low to high
- Embedded, load-sensing thermostat
- Each burner has a runner tube
- Prevent liquids and food debris from reaching other surfaces with 5-in.-tall rear and 4-in.-tall side splashes
- Grease drawer collects liquids for cleanup
- 4-in. legs lift the unit over the countertop
- Electronic spark ignition
- 3⁄4-in. rear gas connection and pressure regulator
- Flue opening is resistant to damage
- Protected exhaust vent
- Flame failure safety device
- Requires 12-in. clearance on sides and 8-in. clearance on rear
- Must be installed under a vent hood
- 40,000 BTU
- cCSAus and CSA Gas-fired listed; NSF certified
Click here to view the spec sheet
For CA Residents: Click here for Prop 65 Warning